Test & Evaluation
- Hydraulic Tester
- • M/C Size: 2476(W)*914(D)*1807(H)
- • Hydraulic Cylinder: Ø190*250mm
- • Electric Source: AC 220V*3 phase *60HZ
- • Control Source : AC 220V*1 phase *60HZ
- • Motor: 1.5KW*6P*220V*60HZ*B5
- • Hydraulic Oil: Mineral oil (ISO VG #46)
- • Max Pressure: 0 ~ 4500psi
- Lab-Scale Dynamometer
- • Disc Size: Ø 110 X 6t
- • Disc Rotational Speed: 100~6,000rpm
- • Load: 10~500kgf
- • Friction Area: 5.6cm²
- • Inertia: Min: 0.40kg·m² / Max : 1.25kg·m²
- • Braking Torque: 25kgf·m(Max 35kgf·m)
- Radial Load Test
- Combined Load Test
- Load Tester
- • Power Source: AC 220V*3 phase* 5kw, 30A
- • Jig: 1000 × 1000
- • Pressure Transducer: ±0.1%
- Wheel Roll Tester
- • Flywheel Diameter: 66 inch
- • Max Speed: 4.5mph
- • Test Specification: MIL-W-5013, SAE ARP5381
- • Wheel Load Pressure Gauge: ±0.1%(±7.5psi)
- • Tire Pressure Gauge: ±0.5%(±7.5psi)
- Full Scale Inertia Dynamometer
for Aircraft Brake System - • Max Rotational Speed : 1,200rpm
- • Max Landing Speed: 372ft/sec
- • Max Tire Load: 34,640lbf
- • Max Brake Pressure: 3,000psi
- • Wheel Diameter: Flywheel No. 1~3: 71in(1,800mm)/
Flywheel No. 4~7: 63in(1,600mm) - • Max Brake Torque: 156,230in-lbf
- Full Scale Dynamometer for
High Speed Train & Wind Turbine - • Max RPM: 2500
- • Max Speed: 350km/h
- • Max Pressure:
- Pneumatic Brake System: 10bar
- Hydraulic Brake System: 200bar - • Max Torque: 20,000N.m
- Temperature & Humidity Chamber
- • Temperature: -70℃∼150℃
- • Capacity: 1℃/min
- • Humidity: 10∼98% RH
